RRI Banner

Development of THz waveguide NbTiN HEB mixers

dc.contributor.authorJiang, Ling
dc.contributor.authorShiba, S
dc.contributor.authorShimbo, Ken
dc.contributor.authorSakai, Nami
dc.contributor.authorYamakura, Tetsuya
dc.contributor.authorSugimura, Mika
dc.contributor.authorAnanthasubramanian, P G
dc.contributor.authorMaezawa, H
dc.contributor.authorIrimajiri, Y
dc.date.accessioned2010-01-20T11:34:20Z
dc.date.available2010-01-20T11:34:20Z
dc.date.issued2009-06
dc.descriptionOpen Accessen
dc.description.abstractIn this paper, we present the development of the waveguide niobium titanium nitride (NbTiN) superconducting hot electron bolometer (HEB) mixers, cryogenically cooled by a 4 K close-cycled refrigerator. The NbTiN thin film is formed on a crystalline quartz substrate by sputtering an NbTi target with the Ar and N2 gas at room temperature. The HEB mixer element is fabricated by using the 12 nm NbTiN film, and is mounted on a waveguide block. Measurement of a Fourier transform spectrometer shows that the response of the mixer is centered near 810 GHz with a bandwidth of about 500 GHz. The uncorrected DSB receiver noise temperature is measured to be 500 K, and the noise bandwidth is to be 1.4 GHz at 810 GHz. The present result shows that a good noise performance can be obtained for the NbTiN HEB mixer even with a relatively thick film (12 nm) fabricated at the room temperature.en
dc.identifier.citationIEEE Transactions on Applied Superconductivity, 2009, Vol.19, p301-304en
dc.identifier.issn1051-8223-P
dc.identifier.issn1558-2515 -E
dc.identifier.urihttp://hdl.handle.net/2289/3894
dc.language.isoenen
dc.publisherIEEEen
dc.relation.urihttp://adsabs.harvard.edu/abs/2009ITAS...19..301Jen
dc.relation.urihttp://dx.doi.org/10.1109/TASC.2009.2019071en
dc.rights© 2009 IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Raman Research Institute's's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.en
dc.subjectTerahertzen
dc.subjectNbTiN filmen
dc.subjectHot electron bolometer mixeren
dc.titleDevelopment of THz waveguide NbTiN HEB mixersen
dc.typeArticleen

Files