RRI Banner

GBD-DART-I: Pulsars and transient source observation between 130 and 350 MHz at Gauribidanur

dc.contributor.authorPandian, B Arul
dc.contributor.authorBagchi, Joydeep
dc.contributor.authorThiagaraj, Prabu
dc.contributor.authorRao, K B Raghavendra
dc.contributor.authorChandrashekar, Vinutha
dc.contributor.authorAbhishek, R
dc.contributor.authorSathyamurthy, Arasi
dc.contributor.authorSandhya, Sandhya
dc.contributor.authorBhattramakki, Sahana
dc.contributor.authorKasturi, S
dc.contributor.authorSethi, Shiv K
dc.date.accessioned2026-08-05T07:58:15Z
dc.date.available2026-08-05T07:58:15Z
dc.date.issued2026-07-20
dc.descriptionOpen Accessen_US
dc.description.abstractGauribidanur Diamond Array Radio Telescope (GBD-DART) is a new, low-frequency radio antenna array with 64 log-periodic dipole array (LPDA) and associated receivers, developed and deployed at the Gauribidanur observatory (13.604 N, 77.427 E). It studies bright pulsars and solar transients in the frequency range of 130–350 MHz. The LPDAs are arranged in a checkerboard pattern. The orthogonal polarisation feeds are formed using pairs of opposite LPDAs. A diamond-shaped (tilted square) array configuration was chosen for high sidelobe suppression in the East-West and North-South directions. The tile measures 5.9 by 5.9 m, with diagonals along North-South and East-West directions, each about 8.3 m. The tile operates as a phased array in transit-observing mode and has been successfully detecting strong pulsars and solar flares for eleven months. The current instantaneous observation bandwidth is 16 MHz, limited by the present digital backend. Array operations are streamlined for remote use. In addition to its scientific role, the system serves as a training platform for radio astronomy using a simple, low-cost telescope. This paper presents details of the array and antenna studies, brief descriptions of the front-end and backend instrumentation, and illustrative results from pulsar and solar flare observations. It also briefly discusses future upgrade plans, focusing on tile sensitivity and backend bandwidth, to extend observation capabilities.en_US
dc.identifier.citationPublications of the Astronomical Society of Australia, 2026, Vol. 43, AR No. e095en_US
dc.identifier.issn1448-6083
dc.identifier.urihttp://hdl.handle.net/2289/8796
dc.language.isoenen_US
dc.publisherCambridge University Pressen_US
dc.relation.urihttps://doi.org/10.1017/pasa.2026.10231en_US
dc.relation.urihttps://doi.org/10.48550/arXiv.2602.00677en_US
dc.rights© The Author(s), 2026.en_US
dc.subjectAstronomical instrumentationen_US
dc.subjectmethods and techniquesen_US
dc.subjecttelescopesen_US
dc.subjectpulsarsen_US
dc.subjectSunen_US
dc.titleGBD-DART-I: Pulsars and transient source observation between 130 and 350 MHz at Gauribidanuren_US
dc.typeArticleen_US

Files