Design of standard loads for calibrating the receiver at the antenna port

Please use this identifier to cite or link to this item: http://hdl.handle.net/2289/7859

Full metadata record

DC Field	Value	Language
dc.contributor.author	Raghunathan, A.	-
dc.contributor.author	Sandhya	-
dc.contributor.author	S, Arasi	-
dc.date.accessioned	2021-12-14T08:40:56Z	-
dc.date.available	2021-12-14T08:40:56Z	-
dc.date.issued	2019-05-13	-
dc.identifier.citation	RRI-EEG Internal Technical Report	en_US
dc.identifier.uri	http://hdl.handle.net/2289/7859	-
dc.description	Restricted Access	en_US
dc.description.abstract	Generally receiver systems are calibrated for their gain and phase characteristics using standard loads such as Short, Open and 50 ohms. In all these modules, connecting ports have two terminals – centre conductor and the ground. So connecting them to receiver modules having similar port types do not create any problem. However, to connect them to antenna port which has only centre conductor, we normally face difficulties due to port mismatch. To solve this problem, a microstrip transmission line based standard loads are designed which can be used to calibrate at the antenna port. This report presents the methodology of designing loads for the antenna port.	en_US
dc.language.iso	en	en_US
dc.rights	2019 Raman Research Institute, Bengaluru	en_US
dc.title	Design of standard loads for calibrating the receiver at the antenna port	en_US
dc.type	Technical Report	en_US
Appears in Collections:	Technical Reports (EEG)

Files in This Item:

File	Description	Size	Format
std_load_for_calibrating_at_antenna_port_internal_report.pdf	Restricted Access	488.33 kB	Adobe PDF	View/Open